User Manual Part 5

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 99
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
12.4.3.1 Remotely set a relay (via email)
If the GSM/GPRS network is detected, DemoAppREMOTE checks for an incoming POP email
message. You may send the email from any email program such as Microsoft Outlook.
• For an ORBCOMM modem, send an email to your modem with the words RELAY0=1 in
the body of the message. The subject line of the email doesn’t matter. Figure 12-36 is
an example of a Relay email to an ORBCOMM modem.
Figure 12-36: DemoAppREMOTE - Set relay email to ORBCOMM modem
• For an Iridium modem, send an email to: [e-mail], with the IMEI number
of your modem in the subject of the message. The IMEI number should be visible on the
white modem label. Include an attachment that contains “RELAY0=1”. See Figure 12-37
for an example of a Relay email to an Iridium modem.
Figure 12-37: DemoAppREMOTE - Set relay email to Iridium modem