User Manual Part 4

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 84
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
12.3 QuickStart application
The QuickStart application provides the minimum framework to build a custom application on the
Q4000/QPRO. It starts the main application task and lists the events used by the foundation to
signal actions to the application.
1. Close any APL.c file that is still open before opening the QuickStart APL.c, in order to avoid
the confusion of having two APL.c files open at the same time.
2. Select the QuickStart Workspace from the drop-down list at the top left-hand corner of the
IDE screen. This will cause the Turnkey group to be grayed out, and the QuickStart group
will become bright yellow.
Figure 12-21: Selecting the QuickStart Workspace
3. Open APL.c from the QuckStart application.