User Manual Part 4

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 92
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
the data are ready to be processed. When the Serial Port example begins, APL.c waits for data
to be input to the AUX port. As it is typed in, it is echoed back to the port. The application waits
for ten seconds, ten characters to be input, or a carriage return to be entered. Once any of those
conditions occur, the modem sends the string via either satellite or GSM/GPRS to the configured
address.
The string “Testing the AUX port” was entered below.
Figure 12-29: DemoAppSERIAL - AUX output of user message