User Manual Part 2

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 68
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
It is not possible to create a new project environment in IAR and download a binary file
from it. You must use the provided IAR project which contains the necessary
parameters to load the Q4000/QPRO. Creating a new project and attempting to load the
resulting binary file into the modem may cause unexpected behavior and may damage
the modem.
12.2.1 Compiling Turnkey
(If you have not yet installed the IAR Embedded Workbench IDE, see Chapter 8.) Double-click
on the Application.eww file to open the IAR Embedded Workbench IDE.
Figure 12-3: Turnkey application workspace in the IAR IDE
The files in this directory comprise an IAR compiled project that consists of a number of
applications (Turnkey, DemoAppCAN, DemoAppFFS, etc.). Each of these applications
demonstrates some capacity of the Q4000/QPRO product. The applications are supplied as
templates for building custom applications in this project environment.
We recommend that new customers begin with the Turnkey project. Before making any changes,
build the project without modifying any of the code. This verifies that the IAR Workbench has
been installed correctly.
Note: