User Manual Part 2

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 60
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
The email to initiate the foundation update:
• must be Plain Text (not HTML or Rich Text).
• must have the subject line: FIRMWARE UPDATE.
• should contain the following tokens in the email body:
o Server: name of the FTP server
o Port: port of the FTP server
o Username: used to access the FTP server
o Password: used to login to the FTP server, or valid text for anonymous access
o File: full path and file name of the file that is to be downloaded
o Retry: number of times to retry download if it fails. If 0, no retries are attempted.
The configuration parameters in Table 10-1 must be configured for foundation update OTA to
work.
Table 10-1: QCFG OTA parameters
Name
Number
(Hex)
Value
QCFG_MODEM_APN_ADDRESS 0x9d ORBCOMM.t-mobile.com
QCFG_MODEM_CONNECT_DUR_S 0x9e 90
QCFG_MODEM_ID_INTERVAL_S 0x9f 0
QCFG_MDMIF_BAUD_RATE 0xa0 115200
QCFG_REQUEST_GLOBALGRAMS 0xa1 0
QCFG_POS_FILTER_MAX_VEL 0xa2 50
QCFG_POS_FILTER_MAX_DIFF 0xa3 25
QCFG_SMTP_SERVER_ADDR 0xa4 <your smtp server>
QCFG_SMTP_SERVER_PORT 0xa5 25
QCFG_SMTP_USER 0xa6 <user name>
QCFG_SMTP_PASS 0xa7 <password>
QCFG_SMTP_TO_ADDR 0xa8 <default TO address>
QCFG_SMTP_SUBJ 0xa9 FIRMWARE UPDATE
QCFG_POP_SERVER_ADDR 0xaa <your pop server>
QCFG_POP_SERVER_PORT 0xab 110
QCFG_POP_USER 0xac <user name>
QCFG_POP_PASS 0xad <password>