User Manual Part 2

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 47
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
www.google.com email does NOT use standard SMTP protocol and will not work with
the Q4000/QPRO.
For T-Mobile/ORBCOMM QCFGs, these settings are pre-set to ensure proper network
connection.
7.2.2 GPRS network parameters
GPRS uses the following QCFG parameters:
Table 7-1: GSM parameters
Par
m
#
Name
Description
Default Value
Min
Max
0x9d
QCFG_MODEM
_APN_ADDRESS
Network provider name ORBCOMM.t-
mobile.com
0x98
QCFG_MODEM
_APN_USER
User login name (if required) [None]
0x99
QCFG_MODEM
_APN_PASS
User password (if required) [None]
0x9e
QCFG_MODEM
_CONNECT_DUR_S
If there is no data exchange
within this timeout period
(seconds), the connection is
closed. 0 for no timeout.
90 0 65535
7.2.3 SMTP and POP (email) server parameters
A valid email account is required on an SMTP server that supports standard SMTP protocol
without SSL or SMPTA. This includes webmail sites such as www.inbox.com and
www.gmx.com. Email attachments are not supported via SMTP and POP. It is possible to send
binary data using MIME-encoding. Table 7-2 lists the SMTP parameters.
Table 7-2: SMTP parameters
Parm
#
Name
Description
Default
Value
Min
Max
0xa4
QCFG_SMTP_SERVER_ADDR
Address of SMTP mail server [None]
0xa5
QCFG_SMTP_SERVER_PORT
SMTP port (usually 25) 25 0 65535
0xa6
QCFG_SMTP_USER
SMTP account user name [None]
0xa7
QCFG_SMTP_PASS
SMTP account password [None]
0xa8
QCFG_SMTP_TO_ADDR
Default email address to which
to send messages
[None]
0xa9
QCFG_SMTP_SUBJ
Default subject of email [None]
Note:
Note: