User Manual Part 1

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY RECIPIENT ONLY FOR
THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED BY RECIPIENT. DISCLOSURE TO
UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE GLOBAL IS PROHIBITED.
Page i
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Revision History
Date Revision
Number
Description
October 2010 A Initial Production Release
December 2010 B Add TIME_SYNC event with parameter which specifies the amount of
time added to real-time clock.
Add description of SMTP message handling when message is too
large.
Add description of CAN bus loading.
Add description of “dR” to save configuration parameters when they are
changed.
Add note that QCT doesn’t work with Iridium to change Turnkey
parameters.
Update DemoApp descriptions and add DemoAppFFS and
DemoAppTCP.
Add information on changed configuration parameters via the debug
menu.
Condense verbose text throughout document.
Add power down requirements.
April 2011 C Add Iridium logging information
Support for Over-the-Air Turnkey Parameters
Additional demo program for ADC
Add note about 0xE000 to 0xEFFF space for user application return
codes.
Change description of DemoAppSERIAL.
Add Quick Start Guide
Add support for Inmarsat
Add description of Network Independent Message Manager (NIMM)
July 2011 D Added additional NIMM information
Added information about debug menus
Additional configuration parameters listed for Orbcomm
October 2011 E Add sample program DemoAppRTOS
Update with recommendations from “Replicating Customer Experience”
Added debug menus
November 2011 F Fix AUX port speed parameters and add info about losing data at high
speeds
December 2011 G Formatting and language overhaul