User Manual Part 1

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 8
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Additional serial connections, I/O, and other signal lines are also available as non-
terminated wires that come shrink
-
wrapped together in the assembly cable.
2.1.2 Connecting the QPRO
The QUAKE part number for the QPRO assembly data cable is QUAKE P/N 1137-0211.
Figure 2-5: QPRO assembly data cable
There are three main components to the QPRO assembly data cable:
1. the locking connector
2. four serial DB9 connectors for use with the Logger port, MTS, AUX, and GSM
3. power (red) and ground (black) banana plugs.
Figure 2-6: QPRO assembly data cable components
Note: