User Manual Part 1

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 4
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
2 Quick Start Guide
The Q4000/QPRO operates from 6VDC to 32VDC. For satellite applications, optimal
performance requires at least 10.5 VDC.
In order to communicate with the Q4000 or QPRO the following is required:
- a computer with at least one available serial port or a USB-to-serial adapter (Keyspan,
part number USA-19HS)
- a power supply capable of providing at least 3 amps at 12 V
- a Q4000 or QPRO assembly data cable
- a Q4000 or QPRO modem.
2.1 Connecting the modem
2.1.1 Connecting the Q4000
The QUAKE part number for the Q4000 assembly data cable is QUAKE P/N 1135-0211.
Figure 2-1: Q4000 assembly data cable