User Manual Part 1

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 2
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Chapter 11: OVER THE AIR UPDATE describes how to update the modem’s firmware
remotely using satellite and GSM.
Chapter 12: EVENT DRIVEN ARCHITECTURE discusses the various events that make up
the software architecture of the Q4000/QPRO modem.
Chapter 13: QUAKE FIRMWARE AND API’S discusses the main modules of the modem
foundation software and their interactions.
Appendix A - ORBCOMM configuration parameters
Appendix B - QUAKE’s ORBCOMM configuration parameters (QCFG)
Appendix C - QUAKE’s Iridium & Inmarsat configuration parameters (QCFG).
Appendix D - Debug and utility menus
Appendix E - Software file naming convention
Appendix F - Glossary of terms
CONFIDENTIALITY OBLIGATIONS.
1.3 Related documents
The following documents contain valuable information:
[1] 1135-0902, Technical Data Sheet Q4000
[2] 1137-0901, Technical Data Sheet QPRO
[3] Q4000/QPRO API Function Reference – From QUAKE Global Website
[4] 1135-4711 QUAKE Configuration Tool (QCT)
[5] 1135-4715 QUAKE Communications Protocol (QCP) User Manual
For Q4000/QPROs with an ORBCOMM satellite transceiver installed, the following ORBCOMM
documentation may assist in application development (see www.ORBCOMM.com)
[6] ORBCOMM Serial Interface Specification, Rev. G or greater
[7] ORBCOMM Gateway Customer Access Interface Specification, Rev. C or greater
[8] ORBCOMM Messaging Services Description
[9] ORBCOMM Application Development for Roaming Phase 1
For Q4000/QPROs with an Iridium satellite transceiver installed, the following Iridium
documentation may assist in application development (see www.iridium.com)
[10] Iridium SBD Developer’s Guide
[11] 4000-3000 Rev. D. AT Command Set Manual
For Q4000/QPROs with an Inmarsat satellite transceiver installed, the following Inmarsat
documentation may assist in application development (see www.skywave.com)
[12] N200_IsatData_Pro_Network_services_Overview
[13] N201_IsatData_Pro_Tateway_Web_service_User_Guide
[14] T203_IDP_100_Modem_series_developers_Guide