Quick Installation Guide Count!Guard Let’s make things safer!
Count!Guard Quick Installation Guide 2 This quick installation guide allows you to install and configure Count!Guard by following a couple steps. Please follow the steps: Step 1: Camera Selection & Placement The camera is positioned higher than 2,50 meters ( 8.2 feet). The camera is mounted vertically (horizontal and vertical deviation angle = 0°). This means it is looking straight down. The camera delivers +/-25 fps to the WebCCTV server.
Count!Guard Quick Installation Guide 3 Execute the following steps: Add your server Add your camera - Select the server in the Servers & Cameras page, click the Edit Server link and select the Cameras tab. Configure Count Algorithm (Step 4) Step 4: Configure Count Algorithm Click the Edit link on Servers & Cameras page.
