Instruction Manual ANDROID APP ON Please read the operation manual carefully before playing
1. GETTING STARTED A. Parts Phone clip Indicator High/Low speed switch Flip Mode Right Joystick (Forward/Backward, Left/Right side flight) Left Joystick (Up/Down, Turn Left/Right) ON Turn Left/ Right Trim Screwdriver Blades USB charging cable Forward and backward Trim Left/Right side flight Trim & Mode Button Power ON/OFF LCD display B. WIFI connection Please fly this product in an area clear of people, animals, or any other obstacles to prevent injury or damage. 1.
2. SMARTPHONE CONTROLLER INTERFACE 1 2 3 4 5 6 8 9 10 21 16 18 17 7 19 20 22 11 14 1. Back 2. Take a picture 3. Take a video 4. Picture & video check 5. Control mode for gravity sensor 15 12 6. ON/OFF 7. Speed selection 8. Flips 9. Rotary screen 10/11. Forward/backward trim 13 12/13. Sideways flying trim 14/15. Turning trim 16. Up/down 17/18. Turn left/right 19/20. Sideways fly 21/22. Forward/backward 3.
. OPERATING METHOD 1. Manual flying control (1) Power control, push up/down on the left button to control up/down. (2) Direction control, push the right button to left/right to make it fly sideways. (3) Direction control, push up/down on the right button to make it move forward/backward. (4) Direction control, push the left button to left/right to make it turn left/right.
Flip mode is off when the icon is white. Flip mode is on when the icon is yellow. (5) Touch the 360° button and it will change to yellow, indicating the flip mode is on. Push the right button up/down, left/right to make the drone flip forward/backward/left/right. 2. Gravity-sensor control Touch the gravity sensor key on your smartphone. It will turn yellow indicating you are now in gravity mode.
(2) Direction control, tilt the phone to left/right to make the drone sideways fly left/right. (3) Direction control, tilt the phone to forward/backward to make the drone fly forward/ backward. (4) Direction control, push the left button to left/right to make it turn left/right. 3. Caution: (1) If you cannot search the wifi, try closing the wifi and then re-connecting to it. (2) If you need to replace the batteries, please completely exit from the app and then select the corresponding network to connect.
5. WIFI CONTROL & OPERATION 1. Preparation before taking off (1) Insert the AA batteries in the controller as shown in the picture below. (2) Please place the drone on a flat, level surface. (3) Stand at least 5 feet behind the drone. (4) Please double check for any obstacles or potential hazards near the area of flight. (5) Please see below how to sync this drone with your remote. Once they are paired, you are ready for take off. 2.
4. Controller modes The remote can be operated in two modes. To change modes, push button B to right, then restart the remote controller's power. B MODE 1 Operating direction Hover up and down Forward and backward Push the throttle up or down, the quadcopter will ascend or descend. Push the direction lever up or down, the quadcopter will fly forward or backward. Turn left and right Sideward fly Pull the throttle left or right, the quadcopter turns left or right.
MODE 2 Operating direction Hover up and down Forward and backward Push the throttle up or down, the quadcopter will ascend or descend. Push the direction lever up or down, the quadcopter will fly forward or backward. Turn left and right Sideward fly Pull the throttle left or right, the quadcopter turns to the left or right. Pull the direction lever left or right, the quadcopter flies to the left side or the right side.
5. Quadrone Functions 1. Low-voltage protection: When the quadcopter battery is running low, power supply to the rotors will be stopped. The quadcopter control system will automatically protect the battery. 2. Restart function: In case of incorrect flight patterns, use the following method to restore the default factory settings. Press the power switch to turn on the transmitter. Press the power switch to turn on the quadcopter.
7. Recalibrating the Drone's Gyroscope If flight cannot be corrected through fine tune trimming, try the following directions to recalibrate the drone's inner gyroscope: (1) Place the drone on a flat, level surface. (2) After matching the drone and remote, switch the speed to high speed, and then push the joysticks to the bottom right corner as shown. When you hear two beeps and a red light flashes, it means the recalibration has been successful. The drone must be on a flat surface to be recalibrated.
BREAKDOWN & DIAGRAM Code Description 01 Upper body 1 08 Reverse motor 2 02 Lower body 1 09 Motor holder 4 03 Rotating blade 2 10 Lampshades 4 04 Reversing blade 2 11 Light boards 4 05 Protecting frames 4 12 Receiver board 1 06 Battery cover 4 13 Battery 1 07 Rotating motor 2 14 Battery cover 1 Quantity Code Description Description Quantity 15 Gear 4 16 Landing skids 2 17 Camera K300C/Wifi 1 Quantity Code MAIN PARAMETER 12" 3" Body length: 12" Body
