Datasheet

Precision Cutting Pliers with Stripping Function

Range 0.75 … 6 mm² (AWG 20-10)

Item-No.: 23T032

The side cutter is sharp and cutting and designed for

fine work. The length of the blade is approx. 14 mm. A

flat tip increases the guidance especially on circuit

boards and in hard-to-reach places.

As a further function, the pliers have 6 recesses for

quick stripping of rigid cables or stranded wires in the

common cross-sections of 0.75 to 6 mm² or AWG 20 -

10, which corresponds to cable diameters of approx.

0.8 to 2.6 mm. The ergnonmic handle lies well in the

hand and allows a good "grip". The pliers have a

locking bar to keep them as compact as possible when

not in use and to protect the blade or uninvolved objects that might be transported with them. The spring mechanism

is inconspicuously integrated into the joint.

Technical Specifications

Cutting-function (very sharp and resistable) • Wire stripping function, range from 0.75 to 6 mm² (AWG 20 … 10) •

Imprint at stripping recesses are imperial and metric (AWG and sqmm) • Weight: 113 g.

Application by qualified electricians only.

Works best with Quadrios` ferrule assortment sets.

PAGE 1
Precision Cutting Pliers with Stripping Function Range 0.75 … 6 mm² (AWG 20-10) Item-No.: 23T032 The side cutter is sharp and cutting and designed for fine work. The length of the blade is approx. 14 mm. A flat tip increases the guidance especially on circuit boards and in hard-to-reach places. As a further function, the pliers have 6 recesses for quick stripping of rigid cables or stranded wires in the common cross-sections of 0.75 to 6 mm² or AWG 20 10, which corresponds to cable diameters of approx. 0.