Data Sheet

Shrinking ratio
3 : 1
Material PE
Shrinking temperature 90°C - 125°C
Operation temperature -45°C - 125°C
Flammability VW-1
Tensile strength ≧ 10.3Mpa
Elongation at break ≧ 300%
Rated voltage 600V
Dielectric strength ≧ 1.5kV/mm at 30sec.
Volume resistivity
≧ 10
14
Ω
100pcs 3:1 Heat shrink adhesive lined tube-assortment
Item No : 1905CA061.
3-1
2-1
4-1
5-1
6-1
8-1
3-2
2-2
4-2
5-2
6-2
8-2
1-1
1-2
7-1
7-2
set contents
Inner diameter ø after shrink ø
1-1
1.6 mm
0.5 mm
32 mm 13
1-2
2.4 mm 0.8 mm2-1
3.2 mm
1.0 mm
32 mm 10
2-2
4.8 mm 1.6 mm 65 mm 6
3-1
6.4 mm 2.2 mm 65 mm 4
3-2
7.9 mm
2.7 mm 65 mm
2
4-1
9.5 mm
3.2 mm 95 mm
2
12.7 mm 4.2 mm
Length pcsSection
Heat shrink tube
32 mm 10
95 mm
3
4-2
Color
5-1
5-2
6-1
6-2
7-1
7-2
8-1
8-2
Black
White
1.6 mm
0.5 mm
32 mm 13
White
Black
2.4 mm 0.8 mm 32 mm 10
3.2 mm
1.0 mm
32 mm 10
4.8 mm 1.6 mm 65 mm 6
6.4 mm 2.2 mm 65 mm
4
7.9 mm
2.7 mm 65 mm
2
12.7 mm 4.2 mm 95 mm
3
9.5 mm
3.2 mm 95 mm
2
White
Black
White
Black
White
Black
White
Black
White
Black
White
Black
This range is particularly suitable for hobbyists,
craftsmen, field service, service workshops,
electronics and the laboratory needs.
100 pieces of shrinking ration 3:1 standard
shrinking tube for a range of application
diameter from 1.6 to 12.7 mm.
Hot-melt adhesive lined tubing in the Black and White color.
The heat-shrink tubing can be used for
insulation, protective covering of components,
as anti-kink protection, protection against corrosion,
as well as repair of cables and lines, and much more be used.