Installation manual
Quadra-Fire • SAPH-MBK-IPI, SAPH-D-PMH-IPI, SAPH-D-MBK-IPI, SAPH-D-CSB-IPI Installation Manual • 2343-980_R8 • 11/1442
Important Notice: Heat shields may not
Heat Shield Requirements for Horizontal
Termination
• DO NOT remove the heat shields attached to the
wall shield restop and the horizontal termination cap
(shown in Figure 7.18).
of the pipe section to properly space it from the pipe
Figure 7.17 Wall Thimble
F. Horizontal Termination Requirements
Install Decorative Wall Components (SLP only)
of
before connecting the termination cap to
connected, slide the wall thimble up to the interior wall










