Installation manual
Quadra-Fire • SAPH-MBK-IPI, SAPH-D-PMH-IPI, SAPH-D-MBK-IPI, SAPH-D-CSB-IPI Installation Manual • 2343-980_R8 • 11/1425
TERMINATION
CAP
EXISTING
METAL
CHIMNEY
SYSTEM
TOP
ADAPTOR
FLASHING
4 in. (102mm)
FLEX PIPE
RETRO CONNECTOR
DIRECT VENT PIPE
Class A Metal Chimney
professionals, or technicians under the direction of
High Wind Termination
Cap
Sheet Metal Screws
Drill Four 1/8 in.
(3mm) Diamater
Holes
Figure 4.22
Figure 4.23
center the retro connector, and attach it to the support
Top Adapter
Sheet Metal Screws
Flex Pipe
Figure 4.21
Figure 4.20
chimney system, and center the top adapter on the top
holes through the top adapter, and into the chimney










