Owner`s manual

Page20
December 1, 2011
Santa Fe NZ Pellet Stove
R
7068-114B
F. Bafe & Brick Replacement
1. Placerightbrickinbehindtherightbracketandthen
slidetotheleftsothetabsarebehindthecenterbrick.
Figure 20.1.
2. Thebrickwillbeushagainsttheback wall and the
braket’snotcheswillbeexposed.Figure 20.2.
3. Pulltheright edgeofthebrickforwardand slidethe
brick into the notches both top and bottom of right
bracket.Figure 20.3.
4. Repeatforleftbrick.
5. Insertbafeintotopfrontofreboxandthenraiseup
thebottomendandinsertbafetabintonotchonthe
rightbrackettolockintoplace.Figure 20.5. Placethe
leftsidehookofthebottombafeoverthetopofbrick
forstability.
6. The bafe does not completely cover the top of the
rebox.ThereisanopeningasshowninFigure 20.6.
Tabs
Do not remove rope
from center brick
Brick is flush against back wall
Brick in
front of
clip and
Notches
exposed
Lift Brick, pull forward at an angle
and drop down into notches
Right Brick Installed
Insert Baffle Tab into Slot
Opening at left side of Baffle
Figure 20.1
Figure 20.2
Figure 20.3
Figure 20.4
Figure 20.5
Figure 20.6










