Owner`s manual

January 17, 2007

7036-135B

Page 15

Mt. Vernon Pellet Insert (AE)

C. Full Reline With Outside Air

Figure 15.1

Outside Air

Termination

Chimney Top

Outside Air

through

Rear Wall

12” (305mm)

min. below

12” (305mm)

min. above

NOTE; Use metal

plate around

exhaust vent pipe

and seal all edges

with non-flammable

insulation such as

fiberglass, mineral

wool or ceramic.

Do not use high

temperature caulk-

ing materials to

seal any edge to

prevent furture

serviceability.

NOTE: Check clearances carefully for this type of instal-

lation to ensure adequate room for outside air venting.

Check building codes prior to installation.

• Installation MUST comply with local, regional, state and

national codes and regulations.

• Consult local building, ﬁ re ofﬁ cials or authorities having

jurisdiction about restrictions, installation inspection, and

permits.

CAUTION

NOTE: In Canada only a full reline is allowed per ULC

S628, ORD ULC C1482.