User's Manual
8 Quadra-Fire•FogataGrande
4
Appliance Set Up
1)AfterplacingtheFogataGrandeinthedesiredlocation,
locatetheovalholeintherebowlandbesureitisposi-
tioned towards the leg where the gas connection is to be
made.
2)Withthelettersprovided,usingtape,identifyleg“A”as
thelegtowhichthegasvalveassemblywillbeattached.
Movingcounterclockwise,labletheremaininglegs“B”,“C”
and“D”asshowninFigure1.Thiswillassityouininstalling
thelogsafterthegasconnectionshavebeenmade.
3)AsshowninFigure2,layleg“A”onitsface(onasmooth
nonabrasivesurfaceto prevent damaging thesurface)to
begintheassemblyofthegassystem.
Asshow,placethegasvalvecontrolboxontheinsideofleg
“A”.Locatetheopenendoftheboxassembly1/2inchback
fromtheedgeofthelegasshowninFigure1.
Nextpositionthetopangewiththetwokeyholeanchor
-
ing holes approximately 3/4 inch down from the seam as
shown.Securethetwomasonryscrewsthroughthetopof
theholesprovidedintotheleg.Donotcompletelytighten
since the control box will need to be removed in order to
completethenalinstallation.
Once the screws have been installed, remove the valve
controlboxinordertoassembletheothercomponenets.
Figure 2
4)Takethepilotassembly,Figure3,andlocatethelabelon
theburnerthatindicatesthelocationforthepilotassembly.
Insertthepilothoodovertheburnertubeandslideitforward
sothetopfrontclipslidesoverthetubeoftheburner.The
lowerbracketontherightsidewillneedtobebentupwith
plierstolockthepilothoodinplace.
Figure 3
5)Placethestainlesssteelgrate(heavyroundbargrate,
suppliedwithrepit)inpositioninthelowerpartofthebowl.
Thisgratewillrestontopofthelowertabs.
Nextplacethescreenoverthegratesothattheovalopen
-
inginthescreenlinesupwiththedirectionofthestainless
barsonthegrateasshowninFigure4.
Feedtheburnerex line, pilot tubeandpiezoignitor wire
downthroughthecenterofthescreenandgrateandthrough
theovalholeinthesideofthebowl
Theburnerwillrestatontheuppertabsontheinsideof
thebowl.
Figure 4
Figure 1










