Owner`s manual

Page 28

Quadra-Fire • COLBAY-FS-B • 250-5195 Rev. R • 10/11

Appliance Setup



Remove shipping materials from inside or underneath the

ﬁ rebox.



Install approved accessories per instructions included with

accessories. Refer to Section 12 for appropriate accesso-

ries.

Shock or ﬁ re risk.

Use ONLY optional accessories approved for

this appliance.

• Using non-listed accessories voids

warranty.

• Using non-listed accessories may result in a

safety hazard.

• Only Hearth & Home Technologies approved

accessories may be used safely.





IMPORTANT! PREVENT PERMANENT STAINING!

2 Screws

Use a soft cloth and a window cleaning solution to clean

all fingerprint oils from the gold or nickel surface of crown

PRIOR to lighting the appliance.

   Remove the door from the appliance. Remove

the existing black crown by removing the four screws on the

back side of the face, and pull the crown off the door.

Set the replacement gold crown in place, reinsert

screws and tighten.



TOOLS REQUIRED: Phillips head screwdriver.

REMOVAL OF METAL REFRACTORY BRICK

To remove existing metal refractory remove the

two screws located on the left and the two on the right sides

behind the side curtains.