Owner`s manual

18 7034-276 January 29, 2014
MT. VERNON AE
F. Quick Start Guide
NOTICE: Anybuttonpressedwillturnonthebacklight.Wallcontrolwillautomati-
callyrevertbacktothestartingscreenifthereisnoactivityfor15seconds;except
forthe“CONFIRMFUELCHANGE”screen.
READY
71
Set at: 68
12:30 PM
MENU
1. At the starting screen, press “MENU”
button once or twice until “MENU”
screen appears.
2. Highlight “FUEL TYPE” using the “UP/
DOWN” buttons to the right side of the
display. Press “SELECT”.
Auto/Manual/Off
User Settings
Fuel Type
MENU
Set Comfort Level
3. Scroll down and highlight “HARD-
WOODPELLET”oryourfueltype.
Sunflower Seeds
Wheat
FUEL SELECTION
Softwood Pellet
Hardwood Pellet
5. Press “DONE” to conrm fuel
change.
CONFIRM FUEL CHANGE
Please empty hopper
of old fuel type and
ensure firebox is clean.
Please refer to
section 8 in manual.
DONE
2. Highlight“AUTO/MANUAL/OFF”.
Press “SELECT”.
User Settings
Fuel Type
MENU
Set Comfort Level
Auto/Manual/Off
3. Highlight“MANUAL”.Press“SELECT”.
AUTO/MANUAL SETTINGS
Manual
Off
Automatic
Manual
CHOOSING FUEL TYPE
TURNING ON APPLIANCE
7. Fill the hopper with fuel. If the hopper
was completely empty or has run out of
fuel,putapproximately 1/2cup of pel-
letsintotherepotforaquickrestart.
8. Besurethehopperlidandglassdoor
arebothclosed.
1. Atthestartingscreen,press“MENU”.
Function Buttons
Buttons
Up
Down
READY
73
Set at: 73
12:30 PM
HEAT OUTPUT
MENU
Room
Temp
Wall Control for Reference
6. Press “DONE” twice or wait 15 sec-
onds for starting screen to reappear.
4. Press“DONE”twiceorwait15seconds
for starting screen to re-appear.
READY
71
Set at: 68
12:30 PM
MENU
4. Now press “SELECT” to choose new
fuel.
READY
71
Set at: 68
12:30 PM
MENU
1. Atthestartingscreen,press“MENU”
button once or twice until “MENU”
screen appears.
3. Highlight“TEMPUNITSF/C”usingthe
“UP/DOWN”buttonstotherightsideof
the display. Press “SELECT”.
CHOOSING TEMP UNIT:
°F or °C
5. Press“DONE”twiceagain,orwait15
seconds for starting screen to re-ap-
pear.
4. Press the “UP” or “DOWN” button
to set desired temperature unit and
press “SELECT”..
USER SETTINGS
Flame Height Adjust
Temp Differential
Temp Units F/C
Auto/Manual/Off
Fuel Type
Set Comfort Level
User Settings
MENU
2. Highlight “USER SETTINGS” using
the “UP/DOWN” buttons to the right
side of the display. Press “SELECT”.