Owner`s manual

January 29, 2014 7034-276 15
MT. VERNON AE
b. Manual
InMANUALcycle,theheatoutputremainsthesame
regardlessofthedifferencebetweenthesetandroom
temperatures. The wall control will function as a simple
on/offthermostat.WhenthesystemissettoMANUAL
theHEATOUTPUTselectionisaddedinthelowerright
corner.
Pressthebuttonunderthisselection toaccess thisfea-
ture.TheHEATOUTPUTscreenisusedtosetthelevel
of heat produced whenever the wall control calls for heat.
Figure 15.3. TheHEATOUTPUTscreenisnotaccessible
inAUTOMATICcycle.
AUTO/MANUAL SETTINGS
Manual
Off
Automatic
Manual
Medium
AUTO/MANUAL SETTINGS
Automatic
Manual
Off
Figure 15.1
Figure 15.2
Figure 15.3
3. Fuel Type
TheFUELTYPEscreenisusedtoselectthefuelthatwillbe
used with the pellet system. The list on this screen indicates
allfuelchoicesavailabletoburnintheappliance.
NOTE: The list of fuels can be updated by your local
dealer as they become available.
Figure 15.5
c. OFF
This selection turns the appliance off. When the appli-
anceissettoOFF,itwillnotlightregardlessofroomtem-
perature. Use this setting when cleaning and maintaining
your appliance.
Manual
Off
Automatic
Figure 15.4
Toselectafueltype,usetheUP/DOWNbuttonstoscrollto
thedesiredfueltypeandthenpressthebuttonunder“Se-
lect”. The arrow will change to indicate the currently select-
ed fuel.
NOTE:Ifyouareburningahighashfuelsetthefuelselec-
tion to “Utility Pellets”.
Whenpurchasingcornorwheattoburninyourappliance,
readtheingredientlabelverycarefully.Do NOT purchase
fuel that contains any additivessuchasoils(i.e.soybean
oil)andmealsasitwillresultinpoorapplianceperformance.
Ifyouarebuyingcornorwheattheonlyingredientthatshould
belistediscornorwheat.
4. Program (7 Day Programming)
The wall control is pre-programmed at 68
o
F for all time set-
tings. It will remain there until it is re-programmed.
Thewallcontrolcanbeprogrammedasasetbackthermo-
stat.Eachdayoftheweekhasfourprogramperiods.The
wallcontrolmenushavesomefeaturesthatmakeiteasyto
Monday
Full Week
Mon-Fri
Sat-Sun
PROGRAMMING RANGE
Figure 15.6
Sunflower Seeds
Corn
Utility Pellet
Softwood Pellet
Wheat
Hardwood Pellet
DONE
SELECT
FUEL SELECTION
a. Full Week
NOTE: It is important to note that the most recent pro-
gramming entry will override all previous programming for
an individual day or range of days.
The small triangle on the left side indicates the current ac-
tive programming line. Figure 15.6. For each of the four
intervalsavailabletoprogramtherearethreeadjustable
values: set hour, set minutes and set temperature. You
will need to increase or decrease the hour to change from
AMtoPM.
programgroupsofdaysalike.Thisminimizesthenumber
of steps required to program the wall control for most appli-
cations.
To access the programming screen, select Program from
the menu screen and then select the desired programming
rangefromthePROGRAMMINGRANGEscreen.