Owner`s manual
Page36
7037-135H
December 16, 2011
R
4300 Wood Stove Series (ACC)
D. Bafe Removal
1.Remove all ash from the rebox, and extinguish all hot
embersbeforedisposalintoametalcontainer.
2. Thebafeboardhas2pieces.Withtheceramicblanket
stillinplace,slideonebafepieceoverthetopofotherone
andpullouttoppiecethroughthedooropeningandthen
removebottombafepiece.Figure 36.1.
3. Removetheceramicblanket.
4. Re-installthebafepiecesonepieceatatime.Besure
thebafeboardsareevenwiththefrontmanifoldtubeand
isrestingonalltubes.Figure 29.1 on page 29.
5. To re-install the ceramic blanket, it is easier to fold it in
halfrst.Placeontopofbafeboard,openupandatten
andsmoothouttheblanket.Re-checkthebafeboardfor
correctpositioning.Figure 36.2.
Figure 36.1- Bafe
Figure 36.2 - Ceramic Blanket
E. Snap Disc Replacement
Magnet
Spade
Connectors
SnapDisc
Figure 36.3
1.Locatethesnapdiscbracketassemblyatthebottomleft
rearcornerofthestove.Figure 36.3.
2. Amagnetholdsthebrackettothestove.Pullthebracket
downawayfromthestovetoexposethesnapdisc.
3. Pull the snap disc and spade connectors up and out of
bracketasshowninFigure 36.4.
4. UsingaPhillipsheadscrewdriver,removethe2screws
fromthesnap discandthen removethesnap discfrom
thespadeconnectors.Replacewithnewsnapdiscand
re-connecttospadeconnectors.
5. Push the snap disc and spade connectors back inside
bracketandre-attachthebrackettothestove.
SnapDiscLocation
Figure 36.4










