Owner`s manual

Page 40
7075-166B
January 10, 2013
R
VOYAGEUR GRAND Wood Insert
C. Securing Stove Pipe/Liner to Flue Collar
1.Thereare4pre-drilledholesintheuecollar90degrees
apart.Attachtheuecollartothestovepipe/liner.Ifthe
seal is questionable use stove mastic Figure 40.2.
2.Attachgaskettobottomsideofuecollarwithathincoat
of silicone.
Flue Collar
Stove Pipe/Liner
Gasket
Figure 40.2
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 40.3
1. Remove the 2 screws already installed on each leg.
2. Move legs to the desired height.
3. Re-install the screws to secure in place.
D. Leveling Legs
B. Optional Elbow Flue Adapter Installation
OptionaluseofaSimpsonDuravent15°UniversalElbow
PartNumber4615 may be purchased directly through your
localSimpsonDurventPipeDistributororfrom yourlocal
Quadra-Firedealer,PartNumberDV-4615.
Figure 40.1 shows a vertical installation and also how to
create an optional 30° elbow installation.
The15°elbowmaybe secured directly to the ue collar.
Followthepipemanufacturer’sinstructionsforusingscrews
or rivets for attachment. Most pipe manufacturer’s 6 inch
(152mm)diameter ue liners maybe attacheddirectly to
the top of the 15° elbow.
A
A
B
B
30 degree
Vertical
30
o
Figure 40.1
Flue
Adapter
A B
Vertical
14 in. (344mm) 253/4in.(532mm)
30 Degree
15 in. (371mm) 251/2in.(525mm)