Owner`s manual

January 10, 2013
7075-166B
Page 29
VOYAGEUR GRAND Wood Insert
R
G. Tools And Supplies Needed
H. Fire Safety
To provide reasonable re safety, the following should be
givenseriousconsideration:
1. Install at least one smoke detector on each oor of
your home to ensure your safety.  They should be
located away from the heating appliance and close
to the sleeping areas.  Follow the smoke detector
manufacturer’s placement and installation instructions,
and be sure to maintain regularly.
2. A conveniently located ClassA fire extinguisher
to contend with small fires resulting from burning
embers.
• Removeapplianceandcomponentsfrompackagingand
inspect for damage.
• Vent system components and doors are shipped in
separatepackages.
• Reporttoyourdealeranypartsdamagedinshipment.
• Read all the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety and
benet.
I. Inspect Appliance and Components
1. Placetheapplianceinalocationnearthenal
installationareaandfollowtheproceduresbelow:
2. Opentheapplianceandremoveallthepartsand
articlespackedinsidetheComponentPack.Inspect
allthepartsandglassforshippingdamage.Contact
your dealer if any irregularities are noticed.
3. Allsafetywarningshavebeenreadandfollowed.
4. ThisOwner’sManualhasbeenread.
5. Floorprotectionrequirementshavebeenmet.
6. Ventingisproperlyinstalledperventmanufacturing
instructions.
7. Theproperclearancesfromtheapplianceandchim-
ney to combustible materials have been met.
8. Themasonrychimneyisinspectedbyaprofessional
and is clean, or the factory built metal chimney is
installed according to the manufacturer’s instruc-
tions and clearances.
9. Thechimneymeetstherequiredminimumheight.
10.
Alllabelshavebeenremovedfromtheglass
door.
11. Plated surfaces have been wiped clean, if appli-
cable.
12. A power outlet is available nearby for use of the
blower assembly.
Inspect appliance and components for damage.
Damaged parts may impair safe operation.
WARNING
• DoNOTinstalldamagedcomponents.
• DoNOTinstallincompletecomponents.
• DoNOTinstallsubstitutecomponents.
Report damaged parts to dealer.
Fire Risk.
Pre-Burn Check List
7/16Socket Framingmateria
Reciprocatingsaw Hightempcaulkingmateriall
Pliers Gloves
Hammer Framingsquare
Phillipsscrewdriver Electricdrillandbits
Flatbladescrewdriver Safetyglasses
Plumbline Tapemeasure
Level
WireCutterstoremovefrompallet
1/2-3/4in.length,#6or#8self-drillingscrews
Misc. screws and nails
Before beginning the installation be sure the following tools
andbuildingsuppliesareavailable: