User manual

ManualsBrandsQTX Light ManualsConsumer electronicsLS-TOPAZ

User Manual –LS-Krypton Laser 152.742UK

15. Disposal :

Please disposal of the unserviceable device according to the current

statutory requirements.

16. Specification :

Voltage : 100/240Vac, 50/60Hz DMX Channels : 8

Fuse : 2A Slow blow Dimensions : 256 x 180 x 99mm

Laser Class : 3B

Power Consumption : 20W

Laser Power : 40mW Green, 100mW Red Weight : 3.0kg

Note: Conforms to Laser and LED Safety standard BSEN60825-1 2007

incorporating corrigendum 2008

Manual copyright protected by QTX Light

LS-Krypton Laser

User manual

152.742UK

Version 1.0

Summary of content (8 pages)

PAGE 1
User Manual –LS-Krypton Laser 152.742UK 15. Disposal : Please disposal of the unserviceable device according to the current statutory requirements. 16. Specification : Voltage : 100/240Vac, 50/60Hz DMX Channels : 8 Fuse : 2A Slow blow Dimensions : 256 x 180 x 99mm Power Consumption : 20W Laser Class : 3B Laser Power : 40mW Green, 100mW Red Weight : 3.
PAGE 2
User Manual –LS-Krypton Laser 152.
PAGE 3
User Manual –LS-Krypton Laser 152.742UK 14. DMX controlling : DMX CHANNEL User Manual –LS-Krypton Laser 152.742UK 1.
PAGE 4
User Manual –LS-Krypton Laser 152.742UK User Manual –LS-Krypton Laser 152.742UK 13. DMX-512 connection : The fixture is equipped with 3-pin XLR connectors for DMX input and output. The SE connectors are wired in parallel. Only use a shielded twisted-pair cable designed for 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another. Building a serial DMX-chain: Caution: At the last fixture, the DMX-cable has to end with a terminator.
PAGE 5
User Manual –LS-Krypton Laser 152.742UK User Manual –LS-Krypton Laser 152.742UK Always allow enough room for adequate ventilation. It is important never to 12. Functions guide: obstruct the fan or air-vents FUNC: Select Function UP: Scroll up The product must be fixed to suitable rigging using an appropriate clamp and DOWN: Scroll down the fixing screws tightened to prevent the fixture from moving. A suitable ENTER: Confirm selection safety cable should also be used.
PAGE 6
User Manual –LS-Krypton Laser 152.742UK LS-KRYPTON LASER: For indoor use only User Manual –LS-Krypton Laser 152.742UK 11. Rear display: 3. General introduction: This dual colour laser has two stepper motors, which in combination with a multipoint diffraction lens, work together to produce a whole new range of effects covering a wide area. It is competitively priced for what it is capable of, making it an ideal addition to any nightclub or mobile DJ set-up.
PAGE 7
User Manual –LS-Krypton Laser 152.742UK 10. Layout: User Manual –LS-Krypton Laser 152.742UK 4. Packaging contents: Please check the contents to ensure that the product has been received in good condition. Laser x 1unit User’s Guide x 1pc IEC Power Lead x 1pc Interlock Connector x 1pcs Safety Keys x 2pcs If you find any accessory is missing or the lighting has arrived with any problems, please contact your local dealer at once.
PAGE 8
User Manual –LS-Krypton Laser 152.742UK User Manual –LS-Krypton Laser 152.742UK 7. Caution: 8. General maintenance: For your safety, please kindly pay attention to all of the warnings below: Be sure to power off the fixture before conducting maintenance. To maintain optimum performance and minimize wear, fixtures should be Always plug in the power plug last and disconnect from the mains when cleaned frequently.