User manual

ManualsBrandsQTX Light ManualsConsumer electronicsLS-TOPAZ

User Manual –LS01 Laser 152.738UK

15. Disposal :

Please disposal of the unserviceable device according to the current

statutory requirements.

16. Specification :

Voltage : 100/240Vac, 50/60Hz DMX Channels : 11

Fuse : 2A Slow blow Dimensions : 250 x 175 x 110mm

Laser Class : 3B

Power Consumption : 25W

Laser Power : 40mW Green, 80mW Red Weight : 2.6kg

Note: Conforms to Laser and LED Safety standard BSEN60825-1 2007

incorporating corrigendum 2008

Manual copyright protected by QTX Light

LS-01 Laser

User manual

152.564UK

Version 2.0

Summary of content (8 pages)

PAGE 1
User Manual –LS01 Laser 152.738UK 15. Disposal : Please disposal of the unserviceable device according to the current statutory requirements. 16. Specification : Voltage : 100/240Vac, 50/60Hz DMX Channels : 11 Fuse : 2A Slow blow Dimensions : 250 x 175 x 110mm Power Consumption : 25W Laser Class : 3B Laser Power : 40mW Green, 80mW Red Weight : 2.6kg Note: Conforms to Laser and LED Safety standard BSEN60825-1 2007 incorporating corrigendum 2008 LS-01 Laser User manual 152.
PAGE 2
User Manual –LS01 Laser 152.738UK User Manual –LS01 Laser 000-255 Rotating Speed (Slow to Fast) 000-075 Clockwise Rotation 076-150 Stop 151-255 Anti-clockwise Rotation 000-255 Librating Range 000-056 LIBRATING Mode 1 057-112 LIBRATING Mode 2 safety information relating to its installation and 113-168 LIBRATING Mode 3 operation.
PAGE 3
User Manual –LS01 Laser 152.738UK 14. DMX controlling : DMX CHANNEL 1 (Mode) 2 (Rotation Speed) 3 (Rotation Speed) 4 (Liberating Range) User Manual –LS01 Laser 152.738UK 1.
PAGE 4
User Manual –LS01 Laser 152.738UK User Manual –LS01 Laser 152.738UK 13. DMX-512 connection : The fixture is equipped with 3-pin XLR connectors for DMX input and output. The SE connectors are wired in parallel. Only use a shielded twisted-pair cable designed for 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another. Building a serial DMX-chain: Caution: At the last fixture, the DMX-cable has to end with a terminator.
PAGE 5
User Manual –LS01 Laser 152.738UK User Manual –LS01 Laser 152.738UK Always allow enough room for adequate ventilation. It is important never to 12. Functions guide: obstruct the fan or air-vents FUNC: Select Function UP: Scroll up The product must be fixed to suitable rigging using an appropriate clamp and DOWN: Scroll down the fixing screws tightened to prevent the fixture from moving. A suitable ENTER: Confirm selection safety cable should also be used.
PAGE 6
User Manual –LS01 Laser 152.738UK LS01 LASER: For indoor use only User Manual –LS01 Laser 152.738UK 11. Layout: 3. General introduction: This high quality unit with red and green lasers gives an effect similar to one when a light is shone on a mirror ball generating thousands of laser points. It can creates light wall, light tunnel and cloud sea effects when used with a fogger/smoke machine. Its 11 DMX channels and sound activation make this unit ideal for disco, bars and night clubs.
PAGE 7
User Manual –LS01 Laser 152.738UK 10. Rear display: User Manual –LS01 Laser 152.738UK 4. Packaging contents: Please check the contents to ensure that the product has been received in good condition. Laser x 1unit User’s Guide x 1pc IEC Power Lead x 1pc Interlock Connector x 1pcs Safety Keys x 2pcs If you find any accessory is missing or the lighting has arrived with any problems, please contact your local dealer at once.
PAGE 8
User Manual –LS01 Laser 152.738UK User Manual –LS01 Laser 152.738UK 7. Caution: 8. General maintenance: For your safety, please kindly pay attention to all of the warnings below: Be sure to power off the fixture before conducting maintenance. To maintain optimum performance and minimize wear, fixtures should be Always plug in the power plug last and disconnect from the mains when cleaned frequently. Usage and environment are contributing factors in the device is not in use or before cleaning.