Operation Manual

6
3. Getting Ready
Before you start using your device, you must install a SIM card and a charged battery. The
SIM card contains your phone number and service details, and it stores phonebook entries
and your messages.
Install the SIM card
1.
Make sure your device is turned off.
2.
Slide the cover latch to remove the battery cover.
Then remove the battery. Lift the battery up from the upper left side of the battery slot
using your fi nger.
3.
Insert the SIM card into the SIM card slot with its gold contacts facing down (the cut-off
corner of the SIM card should match the cut-off corner in the slot).
T
o
To T
take the SIM card out, use the stylus to press into the SIM card slot hole, and then
lightly lift up the SIM card while pressing the left-most side of the SIM card, and then
slide it out.
Slide the SIM
card into the
SIM card slot.
Press lightly to
slide the SIM
card out.
Use the stylus to
press into the SIM
card slot hole.
4.
Replace the battery (see instructions in the next section).
5.
Replace the battery cover.