Installation and Operating Instructions Series 3 or 12 lb. Capacity The Perfect Counting Scale for Any Application • • • • • Counting Weighing Ink Mixing Inventory Control Batching 129 Cramer Road, Jewett, New York 12444 USA 800-831-4175 • 518-734-6514 • Fax: 518-734-6497 Email: info@QTechScales.com • Web Site: www.QTechScales.com Copies of this manual are available in Adobe Acrobat PDF format on our website.
SET-UP: Preparing the Scale for Use Remove the contents from the carton which includes the scale, platter, and the AC adaptor. Install the platter by inserting the pins on the underside into the holes on the top of the scale console. The beveled edge of the platter should face forward. The scale may be powered either with 4 ’C’ Cell batteries or the supplied AC adapter. If using batteries, do not use a mixture of old and new batteries.
FUNCTION: How to Sample Sampling is the process of “teaching” your scale to calculate a unit weight or “weight per 1000” pieces. Once the scale knows the unit weight, it can quickly provide a count by dividing the weight on the scale by the unit weight. This is the most critical step in the entire counting process. The golden rule of sampling is this: the larger the initial sample size, the more accurate your counts will be.
COIN SAMPLING: Item Type Coins or Tokens Sampling Procedure Press the NET/GROSS key to cycle through the available samples sizes and select: C100 TICKET SAMPLING: Item Type Tickets, Coupons, Receipts Sampling Procedure Press the NET/GROSS key to cycle through the available samples sizes and select: C200 FUNCTION: Counting COUNTING: Once the Unit Weight has been determined through the sampling process you may begin adding additional pieces to the scale.
SUGGESTIONS: Tips and Troubleshooting If you should inadvertently press the wrong key and the scale will not respond, turn the scale off and back on again to clear the problem. Purchase a quality surge protector for your scale to avoid damage from electrical surges and spikes. Do not operate cell phones within 6 feet of the scale to avoid interference.
CALIBRATION: Calibration Instructions NOTE: The X-Res scale does not need to be calibrated for normal use. Calibration is required only for ISO certification. Procedure for the X-RES 3 (3 lb. Capacity): Turn the scale on by pressing the ON/ZERO key. Press the UNITS key repeatedly to cycle through the options and stop when ‘grams’ is displayed. (NOTE: The scale can not be calibrated if it is in the ‘PCS’ mode.) Hold down the NET/GROSS and ON/ZERO keys at the same time - the scale will display: ‘01 FnC’.
Other Counting Solutions from QTech ECS Series An Economical Scale for Small Parts Counting, Postal Verification, and Ink Mixing Capacities: Resolution: 5 lbs. - ECS-5 10 lbs. - ECS-10 20 lbs. - ECS-20 1 Part in 60,000 QCS Series Our Most Popular and Versatile Model For Every Counting Application Capacities: Resolution: 3 lbs. - QCS-3 6 lbs. - QCS-6 15 lbs. - QCS-15 30 lbs. - QCS-30 65 lbs.
About QTech Business Products… QTech Business Products is dedicated to providing cost effective solutions to your counting, ink mixing, weighing, and shipping scale needs. Our goal is to provide quality products and exceptional service and support.
