User Manual

Configuring Authentication, Authorization, and Accounting
2.3.3 Configuring Dynamic Subscriber Reauthorization
To configure dynamic subscriber reauthorization, perform the task described
in Table 23.
Table 23 Dynamic Subscriber Reauthorization
Task Root Command Notes
Configure dynamic subscriber
reauthorization.
aaa reauthorization
bulk
Enter this command in the context
configuration mode.
For reauthorization to take effect, vendor VSA 94 provided by Ericsson AB,
Reauth-String, must be configured on the RADIUS server. Vendor VSA 95,
Reauth-More, is only needed if multiple reauthorization records are used for one
command. For example, if you have the following records, the
reauthorize
bulk 1 command causes the RADIUS server to process reauthorization for
reauth-1@local followed by reauth-2@local:
reauth-1@local
Password="redback"
Reauth-String="ID-type;subID;attr-num;attr-value;attr-num;attr-value...
Reauth-More=1
reauth-2@local
Password="redback"
Reauth-String="ID-type;subID;attr-num;attr-value;attr-num;attr-value...
Reauth_String
Attribute number: 94
Value: String
Format: "xxx"*
Send in Access-Request packet: No
Send in Accounting-Request packet: No
Receivable in Access-Request packet: Yes
18
61/1543-CRA 119 1170/1 Uen L | 2012-12-04