• • • • • Retail Stores Laundromats Arcades Vending Routes Car Washes 129 Cramer Road, Jewett, New York 12444 USA 800-831-4175 • 518-734-6514 • Fax: 518-734-6497 Email: info@QTechScales.com • Web Site: www.QTechScales.com Copies of this manual are available in Adobe Acrobat PDF format on our website.
Remove the contents from the carton which includes the scale, platter, and the AC adaptor. Install the platter by inserting the pins on the underside into the holes on the top of the scale console. The sloped edge of the platter should face forward. If any of the pins are bent, contact QTech; inaccurate counts may result. The scale is battery powered with the AC adapter functioning as the charger.
The EZ-60 counts coins by comparing the weight of each coin denomination (as specified by the US Mint) with the total weight on the scale. Because the weight of coins is not consistent due to minting variations and wear, the accuracy of the EZ-60 is plus or minus one or two coins per thousand.
SUBTOTALING (Accumulation Memory): Although the EZ-60’s count capacity is limited to the scale’s maximum weight capacity of 60 pounds, it has the ability to maintain a running subtotal up to a maximum of 999,999 coins. The scale accomplishes this by adding the count of each new container of coins to the total of the previous ones. Here are step-by-step instructions, again using quarters as an example: Function Procedure 1.
4 - Press COIN CAL key and the DENOMINATION window will flash, “0.000” 5 - Using the numeric keys, enter the gram weight of an individual token accurate to four decimal places. As you key in the numbers they will appear in the DENOMINATION window from right to left. A Gold token typically weighs 5.085 grams and a Silver 5.550 grams, but you may need to determine the weight of your particular token through the use of another scale of lower weight capacity and higher resolution.
Operating the Scale in a Draft: An air draft can affect the scale's accuracy. Avoid using the scale near any source of moving air: fans, air conditioners, heaters, or a draft from an open window or door. A Tare Weight is present: The display windows should read “0” before use. If you used the tare feature, there will be a negative count (weight) stored in the scale’s memory. To delete the tare weight remove the container from the scale platter and press the Z Key.
Low-cost, with High Resolution for Small Parts Counting, Postal Verification, and Ink Mixing Resolution: Capacities: 1 Part in 300,000 3 lbs. - X-RES-3 12 lbs. - X-RES-12 QCS Series Our Most Popular and Versatile Model For Every Counting Application Capacities: 15 lbs. - QCS-15 3 lbs. - QCS-3 30 lbs. - QCS-30 6 lbs. - QCS-6 65 lbs. - QCS-65 G Series This moderately priced scale is perfect for counting larger, heavier items Capacities: 30 lbs. - G-30 60 lbs.
QTech Business Products is dedicated to providing cost effective solutions to your counting, ink mixing, weighing, and shipping scale needs. Our goal is to provide quality products and exceptional service and support.
