Wireless Point to Point (WP2P) DIGITAL Remote Control System Quick Start Guide
Wireless Point to Point - DIGITAL – Quick Start Guide – v2.1 – June 2013 2 Wireless Point to Point System Wireless Point to Point (WP2P) modules can be used to link electrical devices together in situations where the physical separation or terrain between them would make direct wiring uneconomic or impractical. The WP2P modules incorporate high speed digital radios which have a range of up to three kilometres. The most basic WP2P system comprises two WP2P modules which have been configured as a pair.
Wireless Point to Point - DIGITAL – Quick Start Guide – v2.1 – June 2013 3 WP2P Repeater Module A WP2P Repeater Module is available to increase the range and coverage of a WP2P system. It is used in situations where the WP2P modules are a long way apart or there is an obstacle preventing line-of-sight between them. The WP2P Repeater Module operates by listening for complete and valid WP2P messages and then re-transmitting them.
Wireless Point to Point - DIGITAL – Quick Start Guide – v2.1 – June 2013 4 Installation and Operation Notes Output Relays The output relays (Labelled RLY1, RLY2 and RLY3) are normally open contacts that are rated at maximum of 2Amps. The relays are internally protected by solid state snubbers for operating with inductive loads. Warning – Do not directly connect to 220V AC voltage.
Wireless Point to Point - DIGITAL – Quick Start Guide – v2.1 – June 2013 5 WP2P systems to be used in the same location. The “Channel number” is identified by the “#” on the packaging label; this example is “Channel #1”. Warning – Do not use the same channel for adjacent systems. For example, if you currently use “#1” ensure the adjacent system is “#3” etc. Operational note – How do the modules communicate? The WP2P modules use an “event driven” approach to communications.
Wireless Point to Point - DIGITAL – Quick Start Guide – v2.1 – June 2013 6 User Notes and Installation Details www.qtech.co.
Wireless Point to Point - DIGITAL – Quick Start Guide – v2.1 – June 2013 7 User Notes and Installation Details www.qtech.co.
