Owner's manual

QDR – QTech Digital Radio – Owners Manual – v1.3 – August 2012 11
www.qtech.co.nz Tel: [phone]
7.0 Configuration Parameters
The QDR is configured by QTech via the USB Port using a desktop application.
The available parameters are defined below:
Parameter Options Notes
2-wire RS485
4-wire RS485
RS232
Standalone Repeater
Repeater with 2-wire RS485
Repeater with 4-wire RS485
Radio Type
Repeater with RS232
Hopping Sequence 1-6
Power Level 1-8 1 = 1 mW
6 = 125 mW for Yagi
7 = 250 mW
8 = 500 mW for Collinear
Customer Number 1-255
Site Number 1-255
Radio Address 1-255
RSSI Mute Threshold -128 – 0 dBm
Background RSSI -128 – 0 dBm Read only
Packet RSSI -128 – 0 dBm Read only
Firmware Version Read only
MAC Address Read only