Owner's manual

QTechMultiPointControllerforWP2P-QuickStartGuide–v1–August2012  7
 
www.qtech.co.nz Tel:033663713
I/OLinkEditor–Example2Advanced
This example is more sophisticated and shows that each WP2P module can
essentiallycommunicatewitheachother,withcommunicationsviatheController.


Multiplelinkscanbeconfiguredforanyinputoroutputanywhereinthesystem.

Inthisexamplethefollowinghappens:
Input1ofWP2Pmodule1isclosed:
 MultiPointControllerOutput1 On
 WP2PModule1Output1  On
 WP2PModule2Output1  On
 WP2PModule3Output1  On
Input1ofWP2Pmodule2isclosed:
 MultiPointControllerOutput2 On
 WP2PModule1Output2  On
 WP2PModule2Output2  On
 WP2PModule3Output2  On
Input1ofWP2Pmodule3isclosed:
 MultiPointControllerOutput3 On
 WP2PModule1Output3  On
 WP2PModule2Output3  On
 WP2PModule3Output3  On

The“Summary”paneontherighthandsideshowsaconfirmationofthemapping.

Note–SavetheConfiguration.Pleaseremembertosavetheconfiguration
and/or press “Print” to provide you with a paper copy of the I/O mapping.
Theseshouldbekeptforfuturereference.