Specifications

QSSC-S4R Technical Product Specification Intel® Remote Management Module 3 (RMM3)
63
6. Intel® Remote Management Module 3 (RMM3)
This 1.23” x 2.30” x 0.062” thick printed circuit board is an external Ethernet management module which is designed to
work with the IBMC (Integrated Baseboard Management Controller) enabling remote graphic server control via a built-
in Web Console. The Intel® RMM3 interfaces via the 34-pin header to the Integrated Baseboard Management
Controller (BMC) on the I/O Riser at the interfaces shown in the following block diagram.
Figure 19 Integrated BMC with Intel® RMM3 Block Diagram
Intel® RMM3 utilizes the on-board ServerEngines* Pilot II Baseboard Management Controller, which is an ARM9
controller with the following features:
y 250 MHz 32-bit ARM9 Processor
y Memory Management Unit (MMU)
y Two 10/100 Ethernet Controllers with NC-SI
y USB 2.0 for Keyboard, Mouse, and Storage devices
y USB 1.1 interface for legacy PS/2 to USB bridging
y Hardware Video Compression for text and graphics
y Hardware encryption
y 2D Graphics Acceleration
y DDR2 graphics memory interface
y Up to 1600x1200 pixel resolution
y PCI Express* x1 support
Advanced server management capabilities enabled when RMM3 is plugged in:
y Embedded Web Console UI supports Remote Power on\off, system health, system info, Event log.
y KVM redirection via either the RMM3 NIC or the baseboard NIC used for management traffic; high performance,
up to two simultaneous KVM sessions.
y USB 2.0 (high speed) media redirection – boot over remote media
y Security – open SSL, open LDAP
y IPMI V2.0 Compliance
y KVM - Automatically senses video resolution for best possible screen capture, high performance