Specifications

HSC IPMB Application and Sensors QSSC-S4R Technical Product Specification
318
Drive Slot 5
Presence
0Fh Drive Slot
(0Dh)
08h Presence auto dev. remove, dev. Inserted
Drive Slot 6
Presence
10h Drive Slot
(0Dh)
08h Presence auto dev. remove, dev. Inserted
Drive Slot 7
Presence
11h Drive Slot
(0Dh)
08h Presence auto dev. remove, dev. Inserted
Notes:
1. Event messages are not generated for this sensor.
2. Only available when HSC is in eight-disk mode.
32.2.1 Digital and Discrete Sensor Formats
Drive slot sensors have unique, device-specific formats.
Table 209. Sensor Formats
Sensor Name Sensor # Format (2-bytes)
Drive Slot Status 02h-09h
Bit 15:13: Reserved.
Bit 12: Identify asserted.
Bit 11: Prepared for Operation.
Bit 10: Ready for Insertion/Removal.
Bit 09: Device Inserted.
Bit 08: Rebuild stopped.
Bit 07: Hot Spare.
Bit 06: Un-configured.
Bit 05: Predicted Fault.
Bit 04: Parity Check.
Bit 03: In Critical Array.
Bit 02: In Failed Array.
Bit 01: Device Rebuilding.
Bit 00: Device Faulty.
Drive Slot Presence 0Ah-11h Bit
15:2: Reserved
Bit 01: Device Inserted/Device Present
Bit 00: Device Removed/Device Absent.
32.3 Event Message Generation
Specified sensor events that are detected by the HSC cause a corresponding event message to be sent out on the
IPMB. Event message generation is configured via IPMI commands. The format for event messages is in the Intelligent
Platform Management Interface Specification.