Specifications

BIOS Error Handling QSSC-S4R Technical Product Specification

246

Error

Code

Error Message Response

0x84F3 Baseboard Management Controller in Update Mode. Major

0x84F4 Baseboard Management Controller Sensor Data Record empty. Major

0x84FF Baseboard Management Controller System Event Log full. Minor

0x8604 Chipset Reclaim of non critical variables complete. Minor

0xA000 TPM device not detected. Major

0xA001 TPM device is missing or not responding. Major

0xA002 TPM device failure. Major

0xA003 TPM device failed self test. Major

0xE0xx Memory invalid type error. Major

0xE1xx Memory disabled. Major

0xE2xx Memory mismatch error. Major

0xE3xx Memory Training Failed. Major

0xE4FC Memory was not configured for the selected Memory RAS configuration. Major

0xE5xx Too many DIMM Types. Major

0xE6xx Memory BIST Failed. Major

0xE7xx SPD Failed Major

Memory POST Error Codes: The memory POST codes are decoded as below. All Memory error codes will be in the

range 0xExxx. For ex: an error code of 0xE323 indicates Memory training failure error reported on CPU socket 1,

Board 0/Channel 0 and DIMM Slot 4.

Byte 1 Byte 2

Bits [15:12] Bits [11:8] Bits [7:5] Bits [3] Bits [2:0]

(Memory) =

0x0E

Error Type CPU

Socket #

reserved DIMM Slot

The Error type values for Correctable Error, Uncorrectable Errors, and Link lane fail over are not yet defined.

21.3.4 POST Error Beep Codes

The following table lists POST error beep codes. Prior to system video initialization, the BIOS uses these beep codes

to inform users of error conditions. The beep code is followed by a user visible code on POST Progress LEDs when no

usable Memory is available in the system.