Specifications

BIOS User Interface QSSC-S4R Technical Product Specification
206
17.2.3.11 Exit Screen
The Exit screen allows you to choose whether to save or discard the configuration changes made on the other screens.
It also allows you to restore the server to the factory defaults or to save or restore them to a set of user-defined default
values. If Load Default Values is selected, the factory default settings (noted in bold in the tables in this chapter) are
applied. If Load User Default Values is selected, the system is restored to previously saved user-defined default
values.
Error Manager Exit
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default
Values
Load User Default Values
Figure 103. Setup Utility — Exit Screen Display
Table 136. Setup Utility — Exit Screen Fields
Setup Item Help Text Comments
Save Changes and Exit Exit the BIOS Setup utility after saving changes.
The system reboots if required.
The [F10] key can also be used.
A confirmation only if an
y
of the setup
fields were modified.
Discard Changes and
Exit
Exit the BIOS Setup utilit
y
without saving
changes.
The [Esc] key can also be used.
Afor confirmation only if an
y
of the
setup fields were modified.
Save Changes Save changes without exiting the BIOS Setup
Utility.
Note: Saved changes may require a system
reboot before taking effect.
Afor confirmation only if an
y
of the
setup fields were modified.
Discard Changes
Discard changes made since the last Save
Changes operation was performed.
Afor confirmation only if an
y
of the
setup fields were modified.
Load Default Values Load factory default values for all BIOS Setup
utility options.
The [F9] key can also be used.
A confirmation prompt appears.
Save as User Default
Values
Save current BIOS Setup utility values as custo
m
user default values. If needed, the user default
values can be restored via the Load User Default
Values option below.
Note: Clearing the CMOS or NVRAM does not
cause the User Default values to be reset to the
factory default values.
A confirmation prompt appears.
Load User Default
Values
Load user default values. A confirmation prompt appears.