Specifications

BIOS User Interface QSSC-S4R Technical Product Specification
200
Boot Option #1 <Available Boot devices>
Boot Option #2 <Available Boot devices>
Boot Option #x <Available Boot devices>
Hard Disk Order
CDROM Order
Network Device Order
BEV Device Order
Add New Boot Option
Delete Boot Option
EFI Optimized Boot Enabled / Disabled
Use Legacy Video for EFI OS Enabled / Disabled
Boot Option Retry Enabled / Disabled
USB Boot Priority Enabled / Disabled
Figure 93. Setup Utility — Boot Options Screen
Table 126. Setup Utility — Boot Options Screen Fields
Setup Item Options Help Text Comments
Boot Timeout
0 - 65535
The number of seconds the BIOS should
pause at the end of POST to allow the user
to press the [F2] key for entering the BIOS
Setup utility.
Valid values are 0-65535. Zero is the default.
A
value of 65535 causes the system to go to
the Boot Manager menu and wait for user
input for every system boot.
A
fter entering the desired timeout,
press the Enter key to register
that timeout value to the system.
These settings are in seconds.
Boot Option #x
A
vailable boot devices. Set system boot order by selecting the boot
option for this position.
Hard Disk Order Set the order of the legacy devices in this
group.
This field appears when 1 or more
hard disk drives are in the system.
CDROM Order Set the order of the legacy devices in this
group.
This field appears when 1 or more
t CDROM drives are in the
system.
Network Device Order Set the order of the legacy devices in this
group.
This field appears when 1 or more
of these devices are available in
the system.
BEV Device Order Set the order of the legacy devices in
this group.
This field appears when 1 or
more of these devices are
available in the system.
A
dd New Boot Option
A
dd a new EFI boot option to the boot order. This option is only displayed if an
EFI bootable device is available to
the system, i.e., an USB drive.
Delete Boot Option Remove an EFI boot option from the boot
order.
If the EFI shell is deleted, it is
restored on the next system
reboot. It cannot be permanently
deleted.
EFI Optimized Boot Enabled
Disabled
If enabled, the BIOS only loads modules
required for booting EFI- aware Operating
Systems.
This field is grayed out when [SW
RAID] SATA Mode is Enabled.
SW RAID can only be used in
Legacy Boot mode.
Use Legacy Video for
EFI OS
Enabled
Disabled
If enabled, the BIOS use the legacy video
ROM instead of the EFI video ROM.
This field appears only when EFI
Optimized Boot is enabled.
Boot Option Retry Enabled If enabled, this continually retries non- EFI-