Specifications

BIOS User Interface QSSC-S4R Technical Product Specification
192
Setup Item
Options Help Text Comments
Warning: If [Disabled] is selected, NIC2 cannot be
used to boot or wake the system.
Onboard NIC3 ROM
Enabled
Disabled
If enabled, loads the embedded option ROM for
the on-board network controllers.
Warning: If [Disabled] is selected, NIC3 cannot be
used to boot or wake the system.
Onboard NIC4 ROM
Enabled
Disabled
If enabled, loads the embedded option ROM for
the on-board network controllers.
Warning: If [Disabled] is selected, NIC4 cannot be
used to boot or wake the system.
Onboard NIC iSCSI
ROM
Enabled
Disabled
If enabled, loads the embedded option ROM for
the on-board network controllers.
Warning: If [Disabled] is selected, NIC1 and NIC2
cannot be used to boot or wake the system.
This option is grayed out and
not accessible if either the
NIC1 or NIC2 ROMs are
enabled.
NIC 1 MAC Address No entry allowed
Information only. 12 hex
digits of the MAC address.
NIC 2 MAC Address No entry allowed
Information onl
y
. 12 hex
digits of the MAC address.
NIC 3 MAC Address No entry allowed
Information onl
y
. 12 hex
digits of the MAC address.
NIC 4 MAC Address No entry allowed
Information only. 12 hex
digits of the MAC address.
Intel
®
I/OAT
Enabled
Disabled
Intel
®
I/O Acceleration Technology (I/OAT)
accelerates TCP/IP processing for onboard NICs,
delivers data-movement efficiencies across the
entire server platform, and minimizes system
overhead.
17.2.3.3.8 System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows you to configure the thermal characteristics of the
system. Information on the thermal characteristics can be found in Section 16.9.
To access this screen from the Main screen, select Advanced > System Acoustic and Performance Configuration.
Advanced
System Acoustic and Performance Configuration
Thermal Throttling Mode CLTT
Altitude
300m or less / 301m-900m / 901m – 1500m / Higher than 1500m
Figure 87. Setup Utility — System Acoustic and Performance Configuration
Table 120. Setup Utility — System Acoustic and Performance Configuration Screen Fields
Setup Item Options Help Text Comments
Thermal Throttling
Mode
No entry allowed [CLTT] - Closed Loop Throttling Mode.
A
ltitude 300m or less
301m-900m
901m-1500m
Higher than 1500m
[300m or less] (980ft or less)
Optimal performance setting near sea level.
[301m - 900m] (980ft - 2950ft)
Optimal performance setting at moderate elevation.
[901m – 1500m] (2950ft – 4920ft)
Optimal performance setting at high elevation.
[Higher than 1500m] (4920ft or greater)
Optimal performance setting at the highest elevations.