Specifications

BIOS User Interface QSSC-S4R Technical Product Specification
188
Setup Item Options Help Text Comments
 Spare Unit: The DDR3 DIMM is functioning as a spare unit for memory RAS purposes.
Note: X denotes the Board identifier <A-H>.
17.2.3.3.4 Mass Storage Controller Configuration Screen
The Mass Storage configuration screen allows you to configure the SATA/SAS controller when it is present on the
baseboard, midplane or backplane of an Intel system.
To access this screen from the Main menu, select Advanced > Mass Storage.
Advanced
Mass Storage Controller Configuration
Onboard SATA Controller
Enabled / Disabled
Configure SATA Mode ENHANCED / COMPATIBILITY / AHCI / SW RAID
AHCI Option ROM
Enabled / Disabled
 SATA Port 0 Not Installed/<Drive Info.>
 SATA Port 1 Not Installed/<Drive Info.>
 SATA Port 2 Not Installed/<Drive Info.>
 SATA Port 3 Not Installed/<Drive Info.>
 SATA Port 4 Not Installed/<Drive Info.>
 SATA Port 5 Not Installed/<Drive Info.>
Figure 83. Setup Utility — Mass Storage Controller Configuration Screen
Table 116. Setup Utility — Mass Storage Controller Configuration Screen Fields
Setup Item Options Help Text Comments
Onboard SATA
Controller
Enabled
Disabled
On-board Serial ATA (SATA) controller.
SATA Mode
ENH
A
NCED
COMPATIBILITY
A
HCI SW RAID
[ENHANCED] - Supports up to six SATA ports with
IDE Native Mode.
[COMPATIBILITY] - Supports up to four SATA
ports[0/1/2/3] with IDE Legacy mode and two SATA
ports[4/5] with IDE Native Mode.
[AHCI] - Supports all SATA ports using the Advanced
Host Controller Interface.
[SW RAID] - Supports configuration of SATA ports for
RAID via RAID configuration software.
This field does not appear when the Onboard SATA
Controller is disabled.
Changing this setting requires a reboot before HDD
boot order can be set.
[SW RAID] option is unavailable when EFI
Optimized Boot is enabled, since SW RAID can
only be used in Legacy Boot mode.
A
HCI Option
ROM
Enabled
Disabled
Enable or Disable the onboard Advanced Host
Controller Interface (AHCI) option ROM.
Note: For AHCI capability in EFI, the AHCI Legacy
Option ROM should be set to [Disabled].
A
ppears on if SATA mode is selected to AHCI
SATA Port 0 < Not Installed /
Drive information>
Information only. This field is unavailable when
RAID Mode is enabled.
SATA Port 1 < Not Installed /
Drive information>
Information onl
y
. This field is unavailable when
RAID Mode is enabled.
SATA Port 2 < Not Installed /
Drive information>
Information onl
y
. This field is unavailable when
RAID Mode is enabled.
SATA Port 3 < Not Installed /
Drive information>
Information only. This field is unavailable when
RAID Mode is enabled.
SATA Port 4 < Not Installed /
Drive information>
Information only. This field is unavailable when
RAID Mode is enabled.
SATA Port 5 < Not Installed /
Drive information>
Information only. This field is unavailable when
RAID Mode is enabled.