Product guide

QSSC-S4R Server System Product Guide Chapter 5: Technician Maintenance
Version 1.0
79
Figure 68. Installing the Inner Rail CMA connector
4. Connect the extension connector of the cable management arm into the extension placed in the left outer rail
in step 1.
Figure 69. Installing the Cable Management Arm to the Extension
Removing the Cable Management Arm (CMA)
1. Press the latch to release and remove the cable management arm from the cable management extension on
the left outer rail.
Note: By orientation from the rear of the system this rail is on the right. This is the left rail according to
the system designation of defining left and right from the front, and all descriptions follow the system
designation.