Product guide

QSSC-S4R Server System Product Guide Chapter 4: Serviceable Components

Version 1.0

1. Power down the system.

2. Remove the top cover. For instructions, see “Removing the Top Cover on page 51.

3. Locate the fan assembly you are replacing. If a fan in the assembly has failed, the amber LED on the fan

model lights.

4. Grasp the fan by the finger latches and squeeze together.

5. Lift the fan upward. See the following figure.

Figure 51. Removing Non-Redundant System Fans

Installing the System Fan Modules

In a non-hot swap fan configuration follow the steps below to install a fan module.

1. Lower the replacement fan into the fan bay.

2. Push down on the fan until it clicks into place.