Product guide

Chapter 4: Serviceable Components QSSC-S4R Server System Product Guide

Version 1.0

Item Feature LED State Description

A. Latch

B LED Green Blinking HDD access or spin up/down

C LED Amber – On HDD fault

Amber – Blinking Predictive failure, rebuild, identify

Off No access and no fault

Figure 35. Hard Drive Carrier

Note: For a full description of LED behavior and differences between SAS and SATA drives refer to

Table 17. 8X HDD Activity LED Functionality on the Hot-Swap Backplane (HSBP) on page 32

Removing a Hard Drive Carrier

1. Press the green drive carrier latch. See “A” in the following figure.

2. Open the bezel fully. See “B” in the following figure.

3. Pull the bezel to remove the drive carrier from the chassis. See “C” in the figure.

4. Place the drive carrier on a clean, static-free work surface.

Figure 36. Removing a Hard Drive Carrier