Product guide

Chapter 3: Server Utilities QSSC-S4R Server System Product Guide

Version 1.0

The following tasks demonstrate some of the features of the Command Line Interface utility. You can monitor

system information, retrieve and save the system event log and start a SOL session.

1. To read the temperature sensors of the remote managed system, type:

dpccli> sensors ¡Vv ¡VT temp

11/14/2008 | 13:58:32 | Baseboard Temp | ok | 28.00 | Celsius

11/14/2008 | 13:58:32 | P1 Mem Margin | ok | 1.00 | Celsius

11/14/2008 | 13:58:32 | IOH Therm Margin | ok | -28.00 | Celsius

11/14/2008 | 13:58:33 | P2 Mem Margin | ok | 0.00 | Celsius

11/14/2008 | 13:58:33 | P1 Therm Margin | ok | -64.00 | Celsius

11/14/2008 | 13:58:33 | P2 Therm Margin | ok | -61.00 | Celsius

2. To read the fan speeds of the remote managed system, type:

dpccli> sensors ¡Vv ¡VT fan

11/14/2008 | 13:59:09 | Processor 1 Fan | ok | 6120.00 | RPM

11/14/2008 | 13:59:09 | Processor 2 Fan | ok | 6120.00 | RPM

11/14/2008 | 13:59:09 | Memory 1 Fan | ok | 0.00 | RPM

11/14/2008 | 13:59:09 | Memory 2 Fan | ok | 4152.00 | RPM

11/14/2008 | 13:59:09 | System 1 Fan | ok | 0.00 | RPM

11/14/2008 | 13:59:09 | System 2 Fan | ok | 2688.00 | RPM

11/14/2008 | 13:59:09 | System 3 Fan | ok | 0.00 | RPM

11/14/2008 | 13:59:09 | System 4 Fan | ok | 2832.00 | RPM

dpccli>

3. To read all system sensors, type:

dpccli> sensors ¡Vv

11/14/2008 | 13:58:03 | BB +1.1V IOH | ok | 1.28 | Volts

11/14/2008 | 13:58:04 | BB +1.1V P1 Vccp | ok | 0.84 | Volts

11/14/2008 | 13:58:04 | BB +1.1V P2 Vccp | ok | 0.84 | Volts