Product guide

QSSC-S4R Server System Product Guide Chapter 3: Server Utilities

Version 1.0

GlobalUserStatus=Disable ------------- GlobalUserStatus=Enable

UserAccessCh1=Disable ------------- UserAccessCh1=Enable

HostIP=0.0.0.0 ------------- HostIP=192.168.1.12x (x = Station number)

SubnetMask=0.0.0.0 ------------- SubnetMask=255.255.255.0

SOLEnable=Enable

PrivilegeLevelLimit=User -------------- PrivilegeLevelLimit=Admin

SolNumberOfRetries=7 -------------- SolNumberOfRetries=5

SolRetryInterval=500 -------------- SolRetryInterval=60

SolBaudRate=38400 -------------- SolBaudRate=115200

QuietBoot=Enable -------------- QuietBoot=Disable

…

Note: SYSCFG does not restore all settings in the saved INI file. For example - the Host IP is not

restored

Remote Management

The Command Line Interface (CLI) console runs on the management console (client system/laptop) and enables

communication between the management console and the network proxy, which in turn communicates to the

managed server. The Command Line Interface lets you control a server from the command line rather than from

a graphical user interface. You can enter Intel® Command Line Interface commands at a command prompt or

from a script file to do the following:

Remotely power on or off a server or reset the server

Read sensor values

Operate remote server in SOL mode

Telnet is used to remotely manage the server. When using telnet to connect to the remote server (to issue

DPCCLI commands and to operate in SOL mode), you must connect the telnet session to the dpcproxy by

specifying (in the telnet command line) the port on which dpcproxy is listening:

1. On the management laptop, double click the Telnet Localhost 623 desktop icon. You will now connect to the

managed server.

2. At the server prompt, type the assigned Integrated BMC IP Address from step 3 in section 2.4.2. For

example: Server: xxx.xxx.xxx.xxx

3. At the username prompt, press the Enter key. You are logging in under the anonymous user account. No

user name is assigned.

4. At the password prompt, enter “password”.

“Login successful” should be displayed on your screen. If not, please contact your instructor.