Product guide

QSSC-S4R Server System Product Guide Chapter 2: Starting Up and Shutting Down the Server
Version 1.0
35
Chapter 2: Starting Up and Shutting Down the Server
Powering Up the Server
Press the power button on the front control panel. The fans start and POST begins.
Note: It might take two minutes or longer for video to be displayed, depending on the amount of
memory installed.
The server attempts to boot from the first device on the list of available devices in the boot manager. If this
device is not available, it moves to the second device. It continues down the list until it reaches the first available
device.
Shutting Down the Server
1. Exit the operating system if applicable.
2. Press and hold the power button until the server shuts down.
Caution Powering down the server with the power button does not remove all power. The +3.3V standby
power is available even when the system is not running. To remove standby power, unplug all
power cords from the system.