Product guide

Chapter 1: System Description QSSC-S4R Server System Product Guide
Version 1.0
30
Intel® Remote Management Module 3 (RMM3)
This 1.23” x 2.30” x 0.062” thick printed circuit board is an external Ethernet management board which is
designed to work with the BMC (Baseboard Management Controller) enabling remote graphic server control via
a built-in Web Console. The optional RMM 3 contains the remote server LAN management support. The module
plugs into a connector provided on the I/O riser.
Intel® RMM3 utilizes the on-board ServerEngines* Pilot II Baseboard Management Controller, which is an ARM9
controller with the following features:
 250 MHz 32-bit ARM9 Processor
 Memory Management Unit (MMU)
 Two 10/100 Ethernet Controllers with NC-SI
 USB 2.0 for Keyboard, Mouse, and Storage devices
 USB 1.1 interface for legacy PS/2 to USB bridging
 Hardware Video Compression for text and graphics
 Hardware encryption
 2D Graphics Acceleration
 DDR2 graphics memory interface
 Up to 1600x1200 pixel resolution
 PCI Express* x1 support
Advanced server management capabilities enabled when RMM3 is plugged in:
 Embedded Web Console UI supports Remote Power on\off, system health, system info, Event log.
 KVM redirection via either the RMM3 NIC or the baseboard NIC used for management traffic; high
performance, up to two simultaneous KVM sessions.
 USB 2.0 (high speed) media redirection – boot over remote media
 Security – open SSL, open LDAP
 IPMI V2.0 Compliance
 KVM - Automatically senses video resolution for best possible screen capture, high performance
 Mouse tracking and synchronization.
 Remote viewing and configuration in pre-boot POST and BIOS setup.
Item Feature Description
1 RMM3 LAN Port RJ45 port for connecting remote management cable
2 Cable connector Connects to I/O Riser
Figure 26. Intel® Remote Management Module 3