Product guide

QSSC-S4R Server System Product Guide Chapter 1: System Description
Version 1.0
7
System Rear
Figure 5 shows the rear view of the system. User-accessible connectors, PCIe slots, and power supply modules
are located at the rear of the system. These components are described in the following sections.
Figure 5. System Rear (Enterprise SKU shown)
Table 4. System Rear Items and Descriptions
Item Description
A SAS Riser Slot PCIe Gen-2x8, ½ length, x8 connector
B I/O Riser Quad Gigabit Ethernet Ports:
Four LAN ports, RJ45 connector. From upper right: LAN 1 and 2; and LAN 3 and 4 at the bottom
LAN port LED:
Status LED – Green On – Ethernet link is detected
Off – no Ethernet connection
Blinking – Ethernet link is active
Speed LED – Green/Amber
(dual color)
Off – 10 Mbps
Green On – 100 Mbps
Amber On – 1000 Mbps
C I/O Riser Module
D Serial Port Connector
E Slot 1 PCIe Gen-2x8, ¾ in. x8 conn., hot swap Slot 6 PCIe Gen-2x8, ¾ in., x8 conn., hot swap
Slot 2 PCIe Gen-2x8, ¾ in. x8 conn., hot swap Slot 7 PCIe Gen-2x8, ¾ in., x8 conn., hot swap
Slot 3 PCIe Gen-2x4, ½ in., x8 conn. Slot 8 PCIe Gen-2x4, ¾ in., x8 conn.
Slot 4 PCIe Gen-2x4, ½ length, x8 conn. Slot 9 PCIe Gen-1x4, ½ in., x8 conn.
Slot 5 PCIe Gen-2x16, ¾ in., x16 conn. Slot 10 PCIe Gen-1x4, ½ in., x8 conn.
*NOTE: Legacy I/O devices i.e. video cards are only supported on slot #1, 2, 3, 4 or 10
F PSU Status LEDs. See “Power Supply Modules” on page 12 for details.
G AC input power connector (4 bays, from right to left: PSU#1, PSU#2, PSU#3, PSU#4)
H Hot swap power supply
I. Fan Fault LED (Amber)
J System ID Button
K System Status/Fault LED
L System ID LED: Blue ID that identifies the system through server management or locally
M USB 2.0 ports (x2)
N VGA video port - standard VGA compatible, 15-pin connector supporting up to 1600X1200 resolution
O CSS LED (Customer Self Service) (Yellow)
P 8x POST code LEDs. See Appendix A: POST Codes on page 157 for details
Q I/O Riser Management Ethernet Port (Intel RMM3) – Optional