Product guide

Chapter 1: System Description QSSC-S4R Server System Product Guide
Version 1.0
2
System Features
Table 2. Chassis Features
Feature Description
Dimensions Height: 4U / 6.8 inches (173.8 mm) Depth: 27.7 inches (704 mm)
Width: 16.7 inches (424 mm) Weight: 110.23 lbs (50 kg) – estimated
Clearance
requirements
Front Clearance: 3 inches (76 mm)
Side Clearance: 1 inch (25 mm)
Rear Clearance: 6 inches (152 mm)
Scalability
 One to four processors supported
 Supports two generations of processors; Intel® Xeon® 7500 series processors and its
next generation
 SAS Riser: 6 Gb SAS RAID card
 Up to eight 2.5 inch SAS/SATA hard drives
 Up to eleven PCIe adapters (Including the SAS Riser)
 Up to 512GB DDR3 RDIMM memory support (16GB/QRx4 RDIMM x 32 or 8GB/DRx4
RDIMM x 64)
 Intel® Remote Management Module 3
Serviceability
 Front access to hot swap hard disk drives
 Easily maintained hot swap fans with individual LED indicators
 Rear access hot swap power supplies with LED indicators
 System power and system status LEDs
 System ID buttons and LEDs on front panel and rear of system
 LED indicators for PCIe hot-swap operations
 Memory configuration and status LEDs, located on memory riser modules
 Processor and IOH failure LEDs (CSS LEDs), located on the main board
 Color-coded parts to identify both hot swap and non-hot swap serviceable components
Availability
 Eleven PCIe slots (including one SAS riser slot), with four slots supporting hot-swap
 Four 850W high efficiency power supplies in a redundant (2+2 or 3+1) configuration
 Eight hot swap system fans in a redundant (7+1) configuration or four hot swap fans in a
non-redundant configuration
 Eight hot swap 2.5-inch SAS/SATA hard disk drives
 Eight memory risers
 SAS Riser supporting RAID with optional battery backup for storing buffer data.
Manageability
 Server Management support via Intel® Remote Management Module 3 (RMM 3)
 Remote management
 Intelligent Platform Management Interface (IPMI) 2.0 compliant
 Wired for Management (WfM) 2.0 compliant
 Remote diagnostics support
 BMC baseboard management controller
Front Control
Panel and
Operator
Panel
 System power button and LED
 System reset button
 NMI button
 System ID button and LED
 System status LED

Hard drive status LED
 LAN1, LAN2, LAN3 and LAN4 status LEDs
 Video connector
 Three USB 2.0 ports
 Fan status / fault LED
Rear I/O
 Four GbE LAN ports
 One I/O riser Management
Ethernet Port via Intel® RMM3
(optional in Value SKU)
 Video connector
 Serial port connector

System status LED
 Fan status / Fault LED
 CSS LED
 System ID button and LED
 Two USB 2.0 ports
 POST code LEDs